TCL 2.0HP Inverter Air Conditioner

The TCL TAC-18CSD/FCI is a 2.0 HP wall-mounted split air conditioner from TCL's FreshIN 3.0 range. Alongside cooling, a liftable fresh air inlet on top of the indoor unit draws in outside air and passes it through four filters. It is rated at 18000(4100~18500) BTU/h and uses R32 refrigerant.

• Fresh air, not just cold air. The FreshIN inlet brings outside air into the room through the top panel, and the unit shows when fresh air is coming in.
• Four filters on the fresh air. TCL's QuadruPuri filters are a pre-filter, a silver ion antibacterial layer, a HEPA filter and a high-density filter.
• Quiet at night. Indoor noise runs from 26 dB(A) in Mute to 49 dB(A) in Turbo.
• Works with a generator. A six-speed generator mode limits the power the unit draws.
• Saves power on its own. TCL's T-AI energy-saving mode adjusts the compressor to hold the temperature.
• Built for heat. TCL rates it for stable operation at outdoor temperatures up to 66 °C.

The indoor unit is silver, with a round display showing air quality on the right of the front panel.

Specifications

• Type: Wall-mounted split, inverter, cooling only
• Cooling capacity: 18000(4100~18500) BTU/h
• Power input: 1550(300~2100) W rated
• Indoor noise: 26 to 49 dB(A)
• Outdoor noise: 56 dB(A)
• Air circulation: 800 m3/h
• Moisture removal: 1.8 litres/h
• Refrigerant: R32, 530 g
• Power supply: 230 V, 50 Hz, single phase (155 to 265 V)
• Suitable room: 15 to 23 m2
• Indoor unit size: 920 mm wide, 313 mm high and 208 mm deep
• Outdoor unit size: 853 mm wide, 602 mm high and 349 mm deep
• Outdoor unit weight: 28 kg

These figures are taken from TCL's published specification for the TAC-18CSD/FCI.